Rozłączniki, wyłączniki - strona 21

This is a voltage presence indicator for Compact NSX 400/630. This accessory detects and indicates that circuit breaker terminals are supplied with power. It may be positioned upstream or downstream of the circuit breaker. It operates with voltages ranging from 220VAC to 550VAC. It lights up when the voltage is above 0.85 Un. It is not compatible with the motor mechanism module.

This is a voltage presence indicator for Compact NSX 100/160/250. This accessory detects and indicates that circuit breaker terminals are supplied with power. It may be positioned upstream or downstream of the circuit breaker. It operates with voltages ranging from 220VAC to 550VAC. It lights up when the voltage is above 0.85 Un. It is not compatible with the motor mechanism module.

This is an open door shaft operator accessory for extended rotary handle. This accessory is compatible with Compact NSXm, Compact NSX and PowerPact B products. It is used to operate the device when the switchboard door is open. This accessory complies with UL 508A standard.

RHUs is a front panel mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. It can activate an alarm and a pre-alarm...

RHU is a front panel mounting communicating residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. It can activate an alarm and...

Simple and quick products to mount and wire up automated control and distribution panels. It is made of 4 conductors with 24 tap-off units at 18 mm intervals. It is suitable for mounting in 800 mm enclosure width.

Simple and quick products to mount and wire up automated control and distribution panels. It is made of 4 conductors with 48 tap-off units at 18 mm intervals. It is suitable for mounting in 1200 mm enclosure width.

This toroid is dedicated to Vigilohm Insulation Fault locators, and to Vigirex residual current protection and monitoring relays. The inner diameter of the toroid is 80 millimeters and the weight is 0.9kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 40 millimeters. The maximum cross section per phase (R, S, T...

This toroid is dedicated to Vigilohm Insulation Fault locators, and to Vigirex residual current protection and monitoring relays. The inner diameter of the toroid is 120 millimeters and the weight is 1.5kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 60 millimeters. The maximum cross section per phase (R, S, T...

PowerPact M-, P-, and R-frame and Compact NS630b–NS3200 electronic trip molded case circuit breakers are designed to protect electrical systems from damage caused by overloads, short circuits, and ground faults. All circuit breakers are designed to open and close a circuit by nonautomatic means and to open the circuit automatically on a predetermined overcurrent. Electronic trip...

It is a torque limiting screws for 3 or 4 poles Compact NSX 100/160/250. This accessory may be used to tighten at the right torque compression lug or busbar power connections. This torque limiting screw is sold by set of 12 parts.

It is a torque limiting screws for 3 or 4 poles Compact NSX 100/160/250. This accessory may be used to tighten at the right torque compression lug or busbar power connections. They are sold by set of 12 parts.

These are 2 carriage switches that provides CE and CD chassis position remote information for Compact NSX 100 to 630 and PowerPact Multistandard H/J/L circuit breakers. The CE contact indicates that the chassis is connected to the circuit breaker. The CD contact indicates that the chassis is disconnected from the circuit breaker. The contacts clip into the fixed part of the chassis...

it is a single early break contact that indicates the position of the rotary handle for Compact NSX 400/630 and PowerPact Multistandard L circuit breakers. An early break contact (CAM), in conjunction with a rotary handle, can be used to anticipate device opening. The contact fits into the rotary handle unit. This auxiliary contact is a common point changeover type contact with...

It is a double early break contact that indicates the position of the rotary handle for Compact NSX 100 to 630 and PowerPact Multistandard H/J/L circuit breakers. An early make contact (CAM), in conjunction with a rotary handle, can be used to anticipate device closing. The contact fits into the rotary handle unit. These auxiliaries are 2 common point changeover type contacts with...

Moduł styków pomocniczych 2NO do rozłącznika.

Moduł styków pomocniczych 1NO do rozłącznika.

Moduł styków pomocniczych 1NC do rozłącznika.

It is an automatic UA controller of source changeover system for Compact NSX, Compact NS and Masterpact devices. It allows the transfer from one source to another one, the engine generator set start-up and the load shedding. It may be installed directly on the Transferpact ACP control plate or mounted on the front panel of the switchboard. The control voltage is from 380VAC to 415VAC...

These are chassis side plates for withdrawable 3 or 4 poles Compact NSX 400/630 circuit breakers. These side plates allow the installation on a chassis in order to facilitate the handling. These side plates are mounted on the base. A withdrawable configuration requires 2 chassis side plates on the circuit breaker and 2 chassis side plates on the base.

It is a fixed toggle padlocking device for Compact NSXm and PowerPact B circuit breakers. It can receive up to three padlocks with diameter of 5 to 8 mm and is used to lock the device in OFF or ON position. Locking in the OFF position ensures isolation as per IEC 60947-2.

This is an adapter part used with auxiliary contact SDE on Compact NSX 100/160/250 devices. This part is mandatory for control units TM, MA or Micrologic 2 if SDE contact is used. This part is not necessary for the other control units.

Rozłącznik 3P 63A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 50A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 50A czarny w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 32A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 32A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 32A czarny w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 25A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 25A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 25A czarny w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

Rozłącznik 3P 20A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.