Rozłączniki, wyłączniki - strona 4

This Compact INS160 is a 3 poles non-automatic switch-disconnector with red rotary handle and yellow front. It is suitable for isolation with positive contact indication, as defined by IEC 60947-1 and IEC60947-3 standards. The operational current is 160A at 415VAC in categories AC22A and AC23A. The rated voltage is 690VAC 50/60Hz or 250VDC. It can be used as an emergency-off device...

This Compact INS160 is a 4 poles non-automatic switch-disconnector with red rotary handle and yellow front. It is suitable for isolation with positive contact indication, as defined by IEC 60947-1 and IEC60947-3 standards. The operational current is 160A at 415VAC in categories AC22A and AC23A. The rated voltage is 690VAC 50/60Hz or 250VDC. It can be used as an emergency-off device...

These accessories are cable connectors for Compact INS40 to 160 devices. These connectors can receive 1 copper or aluminium cable with cross-section from 1.5mm² to 95mm². The connector material is steel for current up to 160 A. The connector snap directly on to the device terminals or clip onto right-angle and straight terminal extensions as well as spreaders. These connectors...

These terminal shrouds are insulation accessories used on Compact INS40 to INS80 switch disconnectors. These accessories are used for protection against direct contact with live connection screws. It is also possible to attach an insulating plate (not supplied) to the shrouds to avoid any contact with the power conductors. They are sold by set of 2 parts.

These terminal shrouds are insulation accessories used on Compact INS100 to INS160 switch disconnectors. These accessories are used for protection against direct contact with live connection screws. It is also possible to attach an insulating plate (not supplied) to the shrouds to avoid any contact with the power conductors. They are sold by set of 2 parts.

These terminal shields are insulation accessories used on Compact INS40 to INS80 switch disconnectors. These lead-sealable insulation accessories used to protect against direct contact with power circuits. The degree of protection is IP40 and IK07. The terminal shields are supplied with lead-sealing accessories. They are sold by set of 2 parts.

These terminal shields are insulation accessories used on Compact INS100 to INS160 switch disconnectors. These lead-sealable insulation accessories used to protect against direct contact with power circuits. The degree of protection is IP40 and IK07. The terminal shields are supplied with lead-sealing accessories. They are sold by set of 2 parts.

It is a mechanical interlocking system for two Compact NSX 100/160/250 devices with a base plate. The authorized positions are one device OFF (closed) and the other ON (opened), or the two devices OFF (closed). Interlocking is carried out on the base plate by a mechanism located behind the devices. The base plate can be installed horizontally or vertically on a mounting rail.

It is a remote controlled source changeover system for Compact NSX 100/160/250 devices. It is composed of an ACP plate and of an electrical interlocking system. This ACP provides in a single unit the protection of the controller, the control and the connection to the devices. The electrical interlocking is implemented by the IVE unit integrating control circuits and a external terminal...

It is an IVE integrated control circuit for the electrical interlocking of Compact NSX, Compact NS and Masterpact devices. The electrical interlocking is used with a mechanical interlocking system. The relays controlling the closing order to the “N” and “R” circuit breakers must be mechanically and/or electrically interlocked to prevent them from giving simultaneous closing...

It is a control plate for source changeover system using Compact NSX, Compact NS and Masterpact devices. This ACP provides in a single unit the protection of the controller, the control and the connection to the devices. The control voltages are 110 VAC 50/60 Hz, 220 to 240 VAC 50/60 Hz, 380 to 415 VAC 50/60 Hz.

It is a removable toggle padlocking device for circuit breakers. This locking accessory is compatible with Compact NSXm, Compact NSX, PowerPact B and EasyPact CVS products. It can receive up to three padlocks with diameter of 5 to 8 mm and is used to lock Compact NSXm in OFF position only. Locking in the OFF position ensures isolation as per IEC 60947-2.

It is an automatic UA controller of source changeover system for Compact NSX, Compact NS and Masterpact devices. It allows the transfer from one source to another one, the engine generator set start-up and the load shedding. It may be installed directly on the Transferpact ACP control plate or mounted on the front panel of the switchboard. The control voltage is from 380VAC to 415VAC...

It is a single standard auxiliary contact that provides all the different indications remotely for Compact NSX, Compact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault...

It is a single low-level auxiliary contact that provides all the different indications remotely for Compact NSX, Compact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault...

It is an extended black rotary handle for Compact INS320/400/630, Compact INV320/400/630 and Compact NSJ400 devices. It is suitable for isolation and it is used for standard applications. This rotary handle is a front control accessory. Rotary handles are designed to offer easy operation, yet high performance in interruption of currents. This extended version makes possible to operate...

It is an extended red rotary handle on yellow front for Compact INS320/400/630, Compact INV320/400/630 and Compact NSJ400 devices. It is suitable for isolation and it is used for standard applications. This rotary handle is a front control accessory, for machine-tool control emergency-off application. Rotary handles are designed to offer easy operation, yet high performance in interruption...

This Compact INS250-100 is a 3 poles non-automatic switch-disconnector with black rotary handle. It is suitable for isolation with positive contact indication, as defined by IEC 60947-1 and IEC60947-3 standards. The operational current is 100A at 415VAC in categories AC22A and AC23A. The rated voltage is 690VAC 50/60Hz or 250VDC. The black rotary handle is designed to offer easy...