Rozłączniki, wyłączniki - strona 51

Rozłącznik 3P 63A czerwony w obudowie IP65. Rozłącznik może być zablokowany za pomocą maksymalnie 3 kłódek z pałąkiem o średnicy 4 - 8mm.

This is an adapter part used with auxiliary contact SDE on Compact NSX 100/160/250 devices. This part is mandatory for control units TM, MA or Micrologic 2 if SDE contact is used. This part is not necessary for the other control units.

It is a fixed toggle padlocking device for Compact NSXm and PowerPact B circuit breakers. It can receive up to three padlocks with diameter of 5 to 8 mm and is used to lock the device in OFF or ON position. Locking in the OFF position ensures isolation as per IEC 60947-2.

These are chassis side plates for withdrawable 3 or 4 poles Compact NSX 400/630 circuit breakers. These side plates allow the installation on a chassis in order to facilitate the handling. These side plates are mounted on the base. A withdrawable configuration requires 2 chassis side plates on the circuit breaker and 2 chassis side plates on the base.

It is an automatic UA controller of source changeover system for Compact NSX, Compact NS and Masterpact devices. It allows the transfer from one source to another one, the engine generator set start-up and the load shedding. It may be installed directly on the Transferpact ACP control plate or mounted on the front panel of the switchboard. The control voltage is from 380VAC to 415VAC...

Moduł styków pomocniczych 1NC do rozłącznika.

Moduł styków pomocniczych 1NO do rozłącznika.

Moduł styków pomocniczych 2NO do rozłącznika.

It is a double early break contact that indicates the position of the rotary handle for Compact NSX 100 to 630 and PowerPact Multistandard H/J/L circuit breakers. An early make contact (CAM), in conjunction with a rotary handle, can be used to anticipate device closing. The contact fits into the rotary handle unit. These auxiliaries are 2 common point changeover type contacts with...

it is a single early break contact that indicates the position of the rotary handle for Compact NSX 400/630 and PowerPact Multistandard L circuit breakers. An early break contact (CAM), in conjunction with a rotary handle, can be used to anticipate device opening. The contact fits into the rotary handle unit. This auxiliary contact is a common point changeover type contact with...

These are 2 carriage switches that provides CE and CD chassis position remote information for Compact NSX 100 to 630 and PowerPact Multistandard H/J/L circuit breakers. The CE contact indicates that the chassis is connected to the circuit breaker. The CD contact indicates that the chassis is disconnected from the circuit breaker. The contacts clip into the fixed part of the chassis...